Dulux Trade Corrocote 1, Metal Etch Primer
Key Information
Finish
Sheen
Coverage
Approx 8m² per litre per coat
Drying Time
Drying Time 1 hour
Coats
2
Product Features
Suitable for interior & exterior use
Provides excellent adhesion
Fast recoating properties - recoat in 4 hours
Provides an excellent primed surface for coating with conventional paints and some heavy-duty coatings
Product Description
Dulux Trade Corrocote 1 Metal Etch Primer Red Oxide is a versatile primer for clean galvanised iron and non-ferrous metals. May be used as a primer on new mild steel and iron surfaces which have been hand prepared for over-coatings with conventional coatings and sand-blasted to Sa2½. minimum for over-coating with Dulux Trade Hi-Chem Epoxy Enamel.
Application Description
Brush or conventional spray.
Health & Safety
For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children Ensure good ventilation during application and drying. Flash Point 12ºC.
Tips & Advice
1. Preparing the Surfaces
Suitable for galvanised iron, steel and all non-ferrous metals.
2. Cleaning
For clean up use ETCH PRIMER THINNER.
Copyright @ 2026 AkzoNobel Paints
