Matt
Approx 12 m² per litre per coat
6 Hours. (with itself/other alkyds). For best results, 24 hours should be allowed before application of topcoat.
2
Penetrates and stabilises existing rust
Creates a barrier to prevent further rust
Helps to level rough and profiled surface
3-in-1 Rust Protection – Kills rust, primes and undercoat all in one
Corrosion resistant
Hammerite No.1 Rust Beater penetrates and stabilises existing rust and creates a barrier that prevents further rust from forming. Once the surface is treated, apply Hammerite Direct to Rust Metal Paint. Corrosion resistance reduces expensive surface preparation. Provides a stable, smooth surface ready for painting. 3 in 1 Rust Protection – Stops new rust, primers and undercoat all in on. Anti-corrosive primer for ferrous metals.
Brush,conventional spray or airless spray,aerosol.
For detailed safety information refer to Material Safety Data Sheet. Flammable Repeated exposure may cause skin dryness or cracking. Contains Ethyl Methyl Ketoxime. May produce an allergic reaction. Vapours may cause drowsiness and dizziness. Harmfull to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep away from sources of ignition. No smoking. Contains white spirit. Use only in well ventilated areas. Inside always keep doors and windows fully open during application and drying. When applying by brush or roller to large interior surfaces or in confined spaces, wear a suitable cartridge respirator or air fed respiratory protective equipment. Refer to your COSHH Assessment. Avoid contact with skin and eyes. When applying it is advisable to wear eye protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use solvent, thinners or white spirit. Keep out of the reach of children. Do not use or store by hanging on a hook. Do not empty into drains or watercourses. Some local authorities have special facilities for disposing of waste paint. Avoid release to the environment. Before use refer to safety data sheet. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. This product contains no added lead. However, the wood and metal surfaces of the building, especially if it is pre-1960, may have been decorated in the past with a paint made with lead pigments. Preparation and removal of such paint can be hazardous.
Suitable for cast ironwork, machinery, railings, street furniture, structural steel work, shot, grit and blasted steel. Do not use on equipment operating at or above 80˚C.Contact with drinking water of foodstuffs.Permanent immersion.Use on non-ferrous metals
Hammerite Brush Cleaner/Thinner.