Dulux Woodgard Rubbol
Key Information
Finish
Low Sheen
Coverage
Approx 10 m² per litre per coat
Drying Time
4 hours
Coats
3
Product Features
Deep nourishing for longer protection
Internationally proven formulation
Protection against extreme weather
Will not flake, crack or disintegrate
Product Description
A clear, solvent-based wood dressing to protect exterior wooden surfaces such as\ndoors, fascia boards, window frames, fences, garden sheds, garden furniture, garage doors and other wooden surfaces, where a durable water repellent dressing is required. Available in clear, light brown and mid brown.
Application Description
Brush or conventional spray.
Health & Safety
Ensure that surfaces are sound and free from dust, dirt, grease and oil. Surfaces must be thoroughly dry - no more than 12% moisture content. Do not apply during cold (below 10°C) or wet weather. Do not apply directly to bare metal surfaces – stop nail holes with wood filler. Do not apply to wet or damp timber. Do not attempt to apply so thickly as to form a film – this may blister, blanch or peel off. It is important to treat the end grain of timber to prevent moisture ingress. It is important to adhere strictly to Application Methods, and to allow adequate drying between coats. N.B. WOODGARD RUBBOL is not recommended for floors or decking.
Tips & Advice
1. Preparing the Surfaces
May be used on all exterior wooden surfaces such as windows, doors, barge boards, etc. where a durable water repellent dressing is required.
2. Cleaning
For clean up use Dulux Pre-Paint Brush Cleaner Degreaser or Mineral Turpentine
Copyright @ 2024 AkzoNobel Paints
